INICIOEQUIPOSSERVICIOSOFTWARECOTIZARCONTACTO
Solicite su Cotización AquíAvisoDePrivacidad

 

E-1065

Just one instrument with so much capacity for work
One way to gauge the value of a weighing instrument is to measure its ability to grow and adapt to new processes. The Model E1065 indicator/controller measures up to this challenge by its ability to grow with your needs and switch easily from job to job.

Control and communication
Easy to use in general weighing applications, the Model E1065 combines the capabilities of process control interface and data management.

Uncomplicated, the E1065 provides process control and data management to most standard and custom-configured weighing platforms using bench and floor scales.

With the advantage of the built-in network interfaces (Ethernet 10/100, PROFIBUS� and DeviceNet�), the indicator/controller is ideally suited for sharing data in tank weighing and truck scale applications.

In addition to offering these interfaces, the E1065 connects to printers, remote displays, computers and SensorComm�, the Avery Weigh-Tronix microprocessor-based digital junction box. This connectivity provides unparalleled flexibility to truck scales and batching Weigh Bar� systems.

An additional feature is the E1065�s bright multi-colored LED display with 0.8" digits, which allows operators to view weights with a quick glance.

Specialized Applications
Checkweighing: The display includes a multi-segment fan graph for fast evaluation so operators can instantly verify that products are within target ranges or above or below acceptable tolerances.

 

Counting routines: The E1065 can display the number of pieces or average piece weight along with gross, net or tare weights.

Peak weight: If a maximum weight reading is required, the E1065 can capture and display the peak measurement of stable weights.

Process control:

  • The indicator is equipped with three setpoint controls to interface with relays for automated mixing or blending operations. Added Performance Features
  • The Model E1065 can serve as a remote display in applications where weights must be read in two locations.
  • Weight information can be transmitted to peripheral printers and/or computers through the indicator�s dual communication ports. Information format may be customized and can include time and date.
  • An IP54-rated enclosure when panel mounted ensures reliable, continuous operation in dusty environments.
  • An optional remote foot control can be added for improved efficiency in common "lift and weigh" applications, giving the operator hand-free control of common scale functions (Zero, Print, Tare, Units or F-1). The optional rack mount kit provides the perfect dimensional fit for those applications

Power requirements

  • 85-265 Volts AC @ 0.3Amp maximum
  • 50/60 H

Excitation

  • +/- 5 volts DC
  • Supports up to eight 350-ohm weight sensor

Analog signal input range

  • +/-60 mV

Analog signal sensitivity

  • 0.2 �V/V/divisions minimum
  • 1.0 �V/V/divisions recommended

Calibration

  • 2 to 5 points stored

Display

  • Six-digit, seven-segment, 0.8-inch high, LED

Standard outputs

  • 10/100 Ethernet (Modbus/TCP, TCP/IP, SMTP, DHCP, Ethernet/IP)
  • PROFIBUS DP
  • DeviceNet
  • Two serial ports
  • RS-232/422/485, SensorComm
  • RS-232 or 20mA current loop
  • Three cutoff outputs

Options

  • Analog output/Pulse input
  • ControlNet�
  • Remote foot control
  • Rack mount kit
  • Desk stand kit
  • TIU3

Plugins Necesarios  

 Copyright © Todos los Derechos Reservados ABSE, S.A. de C.V. 2007